WerkMaster Vacuums

WerkMaster™ V270 Vacuum


The WerkMaster™ V270 internally and automatically flushes filters clear of dust and debris while you work, using only vacuum and ambient air, no blowers, shakers or buttons to push. Electronically controlled filtration system provides maximum reliability and operates on a standard 110-volt 20 amp outlet. With Pulse-Bac's™ exclusive patented filtration system, you will not loose suction or clog filters. Non-Stop Vacuum Power!™ Guaranteed!

WerkMaster V270 Vacuum – Concrete Floor Finishing
The WerkMaster™ V270 generates 270 CFM with 80" of lift and comes with a powder coated 16 gauge steel 20 gallon collection tank.

The WerkMaster™ V270 comes standard with our PTFE coated Spun Bond Polyester twist on filters, capable of capturing dust particles as small as .1micron. These filters are 100% non-woven polyester, more rugged than paper or sock filters, and tough enough you can clean them with a high pressure water hose, dry and re-use.


WerkMaster™ V470 Vacuum

The WerkMaster™ V470 can take on the most demanding environments, no matter how big the job the V470 will keep working all day without ever clogging the filters. Equipped with patented Pulse-Bac filtration Technology, the V470 is the only industrial vacuum and dust collection unit that will not clog filters during operation. Guaranteed! Our fully automatic filtration system internally flushes filters clear of dust and debris while you work using only ambient air and vacuum. Only Pulse-Bac Vacuums deliver Non-Stop Vacuum Power!™

WerkMaster V470 Pulse-Bac Vacuum – Concrete Polishing
Model: V470
Filtration System: Pulse-Bac® Self Cleaning
Filter Media: 5 x Filter, 100% Spun Bond Polyester with P.T.F.E Coating.
Motor: Ametek Gen II Infin-A-Tek, SR Tangential bypass discharge motor brushed or brushless.
Performance: 450 CFM, 90" Lift
Vacuum inlet Port: 3 inch.
Voltage: 220/230 Volts 50/60 Hz, Single Phase.
Current: 15 Amps.
Dimensions: 28.3" W. x 62.7" H x 45.3 L
Weight: 220 lbs.
Casters: 5" in back, locking swivel 3" in front, both set of casters are non-conductive, and non-marking.

 
Concrete | Stone | Hardwood | About Us | Contact Us
Press Releases | Trade Shows | Site Map | Home